TM 10-3930-675-20-2
0070 00-3
ALTERNATOR DRIVE BELT MAINTENANCE - CONTINUED
0070 00
ADJUSTMENT - CONTINUED
NOTE
Turn adjusting screw clockwise to increase tension. Turn adjusting screw counterclockwise to decrease tension.
3.
Turn adjusting screw (1) to obtain correct tension. Tighten jamnut (2).
4.
Tighten retaining screw (3) to 60 lb-ft (81 Nm).
5.
Tighten alternator mounting screw (5) and locknut (6) to 35 lb-ft (47 Nm).
6.
Turn master battery switch to ON position.
7.
Start engine (TM 10-3930-675-10) and run for approximately 10 minutes. Shut engine down and check belt tension.
Readjust belt tension as required.
8.
Install engine cover (WP 0143 00).
END OF WORK PACKAGE
8
1
2
3