TM 10-3930-675-20-20082 00-2ELECTRONIC JOYSTICK ASSEMBLY WIRING HARNESS REPLACEMENT - CONTINUED0082 00REMOVAL - CONTINUED4.Loosen two screws (5) and disconnect connector (11) of joystick wiring harness (2) from bottom of joystick (12).NOTEEmergency stop switch will come free of joystick housing when red knob is removed.5.Push in and rotate red knob (6) of emergency stop switch (7) slightly counterclockwise and remove red knob from joy-stick housing (4).6.Pull emergency stop switch (7) downward and away from joystick housing (4).7.Lift tab of two connectors (8) of joystick wiring harness (2) and disconnect two connectors from emergency stop switch(7).8.Lift tab of connector (10) of joystick wiring harness (2) and disconnect connector from override switch (9). Removeswitch.1256784910112
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
