TM 10-3930-675-20-2
0082 00-5
ELECTRONIC JOYSTICK ASSEMBLY WIRING HARNESS REPLACEMENT - CONTINUED
0082 00
INSTALLATION - CONTINUED
4.
Install cover (14) to seat base (13) and tighten three turnbuttons (15).
5.
Install override switch (9) and connect connector (10) of joystick wiring harness (2) to switch.
6.
Connect two connectors (8) of joystick wiring harness (2) to emergency stop switch (7).
7.
Position emergency stop switch (7) to hole at upper end of joystick housing (4).
8.
Push red knob (6) thru hole and into emergency stop switch (7). Rotate knob slightly clockwise to install.
9.
Connect connector (11) of joystick wiring harness (2) to bottom of joystick (12) and tighten two screws (5).
13
15
14
12
5
6
7
8
4
9
10
11
2
