TM 10-3930-675-20-2
0083 00-3
HEADLIGHT MAINTENANCE - CONTINUED
0083 00
LIGHT REMOVAL
NOTE
Use marker tags to ensure proper connection of connectors.
Electrical connectors of light may be repaired in accordance with WP 0111 00.
1.
Remove bulb (refer to Bulb Replacement).
2.
Remove nut (10), lockwasher (11), and light assembly (7) from bracket (8).
3.
Disconnect two connectors (12) from black plastic connector (4) and remove two wires (9) with connectors from rear of
light assembly (7).
LIGHT INSTALLATION
1.
Position two connectors (12) and wires (9) thru rear of light assembly (7) and connect two connectors to black plastic
connector (4).
2.
Install light assembly (7) to bracket (8) with lockwasher (11) and nut (10).
3.
Install bulb (refer to Bulb Replacement).
END OF WORK PACKAGE
4
7
8
9
10,11
12