TM 10-3930-675-20-2
0103 00-4
STEERING SYSTEM WHEEL SENSOR REPLACEMENT - CONTINUED
0103 00
INSTALLATION
1.
Position cable (15) with sensor assembly to vehicle.
2.
Position cable (15) to junction box (18).
3.
Install grommet (21) and cable nut (20) to junction box (18).
NOTE
Use electrically conductive grease on wire connections before connections are made.
4.
Connect seven wires of cable (15) to terminal blocks (19) of junction box (18) as follows:
Table 1. Front Junction Box X167 Wire Connections.
LEFT-FRONT SENSOR
RIGHT-FRONT SENSOR
Black No. 1 across from Brown
Black No. 1 across from Gray
Black No. 2 across from White
Black No. 2 across from Black
Black No. 3 across from Violet
Black No. 3 across from Red
Black No. 4 across from Orange
Black No. 4 across from Blue
Black No. 5 across from White/Black
Black No. 5 across from Yellow
Yellow/Green across from White/Red
Yellow/Green across from Green
Silver to Ground Terminal
Silver to Silver
19
18
15
20
21
