TM 10-3930-675-20-20142 00-10CAB TRANSPORT LIFT MAINTENANCE - CONTINUED0142 00CAB TRANSPORT LIFT STRUCTURE INSTALLATION - CONTINUEDWARNING•Use extreme caution when handling heavy parts. Provide adequate support and use assistance duringprocedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keepclear of heavy parts supported only by lifting device. Failure to follow this warning may result in deathor injury to personnel.•Lifting device must have a 2000 lb (980 kg) capacity to lift cab transport lift brackets. Failure to followthis warning may result in death or injury to personnel.2.Using a nylon sling and suitable lifting device, install two transport lift brackets (9) to vehicle with 16 washers (17) andeight screws (10). Do NOT fully tighten screws.3.Place bottom of cab lifting cylinders (3) into transport lift brackets (9).4.Install each of two cab lifting cylinders (3) to transport lift brackets (9) with new cotter pin (16), three washers (15), andscrew (14).5.Install plate (11) to bottom of transport lift brackets (9) with four washers (13) and screws (12).910,17
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
