TM 10-3930-675-20-2
0148 00-9
BOOM-TO-BOOM EXTENSION FLEXIBLE CONVEYER MAINTENANCE - CONTINUED
0148 00
INSTALLATION - CONTINUED
9.
Using new tiedown straps, install boom wiring harness (3) and cable (6) along right side of boom (4).
10.
Connect connector (7) of cable (6) to connector (8).
11.
Connect connector (5) of boom wiring harness (3) to connector (1) and install two screws (2).
12.
Return boom to operational position (TM 10-3930-675-10) and check for leaks.
13.
Add hydraulic oil to reservoir, if necessary (LO 10-3930-675-12).
NOTE
Replace hydraulic reservoir return filters after 100 hours of operation (WP 0183 00).
END OF WORK PACKAGE
1
2
3
4
5
6
7
8
