TM 10-3930-675-24-1
TROUBLESHOOTING PROCEDURES (NON-ERROR CODE) - CONTINUED
0007 00
Table 1. Engine Troubleshooting Procedures (Non-Error Code) - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
10.Engine Shuts Off Unexpectedly - Continued.
c. Repair any loose or missing
connections (WP 0113 00).
Notify SRA.
4. Check for clogged fuel/water a. Ensure fuel line shutoff valve
separator or leaking fuel lines,
is open (RESET or USMC).
hoses, and fittings that may
allow air into fuel system.
Check for restricted fuel lines
(supply and return).
b. Tighten or repair fuel lines,
hoses, and fittings (WP 0060
00).
c. Replace clogged fuel/water
separator (WP 0059 00).
5. Check
for
turbocharger Check and replace turbocharger
malfunction.
(WP 0217 00).
11. Engine Starts but Will Not Keep Running.
1. Check for any error codes that
Error codes 1143, 1151, 1155,
de-rate engine RPM and shut
1234, and 1415 will shut engine
down after 30 seconds
down (low oil pressure, high
(RESET or USMC).
temp, or overspeed).
Correct error code using the
troubleshooting procedures.
2. Check fuel level in tank.
Fill fuel tank.
3. Check battery voltage.
Service batteries and connections
(WP 0108 00 and WP 0110 00).
4. Check circuit breakers F13, a. Replace faulty circuit breaker
F4, and F5 for trip and voltage
(WP 0074 00).
(24V). Check for voltage at
X16 pin 9 and EUC (794) pin
38 with the ignition on.
b. If voltage not present, check
continuity of wires A169 and
169 (WP 0048 00-10).
c. Repair any loose or missing
connections (WP 0113 00).
Notify SRA.
0007 00-12
