TM 10-3930-675-24-1
TROUBLESHOOTING PROCEDURES (NON-ERROR CODE) - CONTINUED
0007 00
Table 1. Engine Troubleshooting Procedures (Non-Error Code) - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
11.Engine Starts but Will Not Keep Running -
5. Check for parasitic loads on Check for hydraulic
Continued.
engine.
malfunctions, etc., that cause
loading on engine.
6. Check for poor quality or Compare fuel used with type and
wrong type of fuel.
grade specifications (TM 10-
3930-675-10).
12. Engine Vibration Excessive.
1. Inspect for engine misfiring.
Perform troubleshooting
procedure for Engine Runs Rough
in this work package.
2. Inspect
for
belt-driven Check alternator and air
accessories malfunctioning.
conditioner compressor
operation.
3. Check for loose or damaged a. Tighten loose engine mounts.
engine mounts.
b. Replace engine mounts (WP
0198 00).
4. Check for loose or damaged a. Tighten loose engine vibration
engine vibration damper.
damper.
b. Replace vibration damper (WP
0203 00).
13. Fuel Consumption Excessive.
1. Check for leaking fuel lines, Tighten or repair fuel lines, hoses,
hoses, and fittings.
and fittings (WP 0060 00).
2. Check for poor quality or Compare fuel used with type and
wrong type of fuel.
grade specifications (TM 10-
3930-675-10).
3. Check engine oil level.
Verify engine oil is not overfilled
(WP 0050 00).
4. Check for leaking, damaged, a. Tighten or repair air intake
or restricted air intake hoses,
hoses, lines, and clamps (WP
lines, and clamps. Check for
0058 00).
dirty or clogged air cleaner
element.
b. Service or replace air cleaner
element (WP 0057 00).
5. Check
for
turbocharger Replace turbocharger (WP 0217
malfunction.
00).
0007 00-13
