TM 10-3930-675-24-1
TROUBLESHOOTING PROCEDURES (NON-ERROR CODE) - CONTINUED
0007 00
Table 1. Engine Troubleshooting Procedures (Non-Error Code) - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
15.Engine Oil Pressure - Low - Continued.
c. Pressure wash engine and
check repairs for leaks.
3. Check for any error codes that
Error codes 1143 and 1145 will
de-rate engine RPM (for
shut engine down (low oil).
RESET or USMC vehicles,
Correct error code using the
shut down after 30 seconds of
troubleshooting procedures.
de-rate).
4. Check if engine oil is a. Take an oil sample and have it
contaminated or does not meet
tested for contaminants, type,
specifications for current
and specifications (WP 0050
operating conditions.
00).
b. Change oil and filter (WP 0050
00).
16. Engine Oil Pressure - High.
Check if engine oil is
Replace engine oil and filter WP
contaminated or does not meet
0050 00).
specification for current
operating conditions.
17. Engine Cold Start System Not Working.
1. Check circuit breaker F17 for a. Reset circuit breaker.
trip.
b. Replace faulty circuit breaker
(WP 0074 00).
2. Remove engine cover and a. Replace empty or missing
check cold start ether canister,
canister (WP 0061 00).
system tubing, activation
solenoid,
and
engine
temperature
sensor
for
damage.
b. Replace any damaged or
disconnected tubing (WP
0061 00).
c. Replace damaged activation
solenoid or engine
temperature sensor (WP 0061
00).
3. Check cold start system wiring Repair any loose or missing
in
engine
compartment, connections (WP 0113 00).
inspect wiring and connections
at the activation solenoid and
engine temperature sensor.
0007 00-16
