TM 10-3930-675-24-1
ENGINE FUEL INJECTOR CIRCUITS TROUBLESHOOTING - CONTINUED
0008 00
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Error Code 1332 - Injector Circuit Failure - 9. Place ignition switch in OFF
Continued.
position and, with rocker arm
cover removed, disconnect
internal actuator harness from
15-pin connector.
a. Measure resistance from pin If resistance is not as specified,
1 (or A) on internal harness notify SRA to replace internal
side of actuator harness 15- actuator harness.
pin connector to all other
pins
in
connector.
Resistance should be greater
than 100k Ohms.
b. Measure resistance from pin If resistance is not as specified,
2 (or B) on internal harness notify SRA to replace internal
side of actuator harness 15- actuator harness.
pin connector to all other
pins
in
connector.
Resistance should be greater
than 100k Ohms.
>100K OHMS
>100K OHMS
10.Place ignition switch in OFF
position and, with rocker arm
cover removed, disconnect
injector solenoid connector on
internal actuator harness from
no. 4 injector solenoid.
0008 00-68
