TM 10-3930-675-24-1
ENGINE FUEL INJECTOR CIRCUITS TROUBLESHOOTING - CONTINUED
0008 00
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Error Code 1332 - Injector Circuit Failure -
a. Measure resistance from a. If resistance is not as specified,
Continued.
actuator harness connector
repair or replace connectors
(WP 0113 00).
pin 26 to engine block
ground. Resistance should b. If engine harness requires
replacement, notify SRA.
be greater than 100k Ohms.
b. Measure resistance from a. If resistance is not as specified,
actuator harness connector
repair or replace connectors
(WP 0113 00).
pin 36 to engine block
ground. Resistance should b. If engine harness requires
replacement, notify SRA.
be greater than 100k Ohms.
>100K OHMS
6. Place ignition switch in OFF
position. Remove rocker arm
cover
(WP
0052
00).
Disconnect injector solenoid
connector from no. 4 injector
solenoid and internal actuator
harness
from
15-pin
connector.
a. Inspect internal actuator Clean and repair connector(s) as
injector required (WP 0113 00).
harness
and
solenoid connector for dirty,
corroded, bent, broken,
pushed back, and extended
pins.
0008 00-65
