TM 10-3930-675-24-2
BLACKOUT LIGHT MAINTENANCE - CONTINUED
0087 00
BULB/REFLECTOR REPLACEMENT - CONTINUED
2.
Disconnect terminal plug (5) and connector (6) from inside blackout light housing (3).
3.
Remove two spring clips (7) and remove bulb/reflector assembly (1) from ring (2).
2
3
5
6
1
7
4.
Install new bulb/reflector assembly (1) on ring (2) and install two spring clips (7).
5.
Connect connector (6) and terminal plug (5) inside blackout light housing (3).
6.
Install bulb/reflector assembly (1) with ring (2) in blackout light housing (3) and tighten three screws (4).
2
1
3
4
0087 00-2