TM 10-3930-675-24-2
TWISTLOCK INDICATOR LIGHTS MAINTENANCE - CONTINUED
0088 00
TWISTLOCK INDICATOR LIGHT INSTALLATION
CAUTION
For proper operation of twistlock indicator light, bend two metal tabs at lamp housing mounting
screws 180 degrees to prevent grounding lamp housing to light bracket.
NOTE
Cable clamp at rear of top (red) indicator light housing will also be installed as screws and new lock-
nuts are installed.
1.
Install lamp housing (3) on light bracket (8) with two screws (6) and new locknuts (5).
2.
Connect connector (7) and connector (9) to lamp housing (3).
Install bulb on indicator light (refer to Twistlock Indicator Light Bulb Replacement).
3.
5,6
3
7
9
8
NOTE
If one IR light needs replacing, all six IR lights must be replaced.
Remove tiedown straps as required and discard.
1.
Loosen nut (11) and remove IR light (10) from IR light bracket (13).
2.
Repeat step 1 for five remaining IR lights (10).
0088 00-4