TM 10-3930-675-24-2
BLACKOUT LIGHT MAINTENANCE - CONTINUED
0087 00
BLACKOUT LIGHT REMOVAL
NOTE
Electrical connectors of light may be repaired in accordance with WP 0113 00.
1.
At rear of bracket (8), disconnect connector (10) of wiring harness from rear of blackout light (9).
2.
Remove nut (11), washer (12), and blackout light (9) from bracket (8).
9
10
8
11,12
BLACKOUT LIGHT INSTALLATION
1.
Install blackout light (9) on bracket (8) with washer (12) and nut (11).
NOTE
Apply electrically conductive grease to connector before connection is made.
2.
At rear of bracket (8), connect connector (10) of wiring harness to rear of blackout light (9).
END OF WORK PACKAGE
0087 00-3/(0087 00-4 Blank)
