TM 10-3930-675-24-2
ENGINE SENSORS REPLACEMENT - CONTINUED
0094 00
INTAKE MANIFOLD PRESSURE SENSOR REMOVAL - CONTINUED
15
2
14
17
16
INTAKE MANIFOLD PRESSURE SENSOR INSTALLATION
1.
Install new O-ring seal (16) on intake manifold pressure sensor (17).
2.
Install intake manifold pressure sensor (17) on intake manifold (14). Tighten sensor to 120 lb-in. (14 Nm).
NOTE
Ensure locking tab on connector snaps in place.
3.
Connect connector (15) of engine wiring harness (2) to intake manifold pressure sensor (17).
4.
Install engine cover (WP 0148 00).
AMBIENT AIR PRESSURE SENSOR REPLACEMENT
NOTE
The ambient air pressure sensor is located on a bracket on the left side of the engine to the right-rear
of the engine ECU. It is replaced in the same manner as the intake manifold pressure sensor.
0094 00-5
