TM 10-3930-675-24-2
ENGINE SENSORS REPLACEMENT - CONTINUED
0094 00
OIL PRESSURE/TEMPERATURE SENSOR REMOVAL
1.
Disconnect connector (20) of engine wiring harness (2) from oil pressure/temperature sensor (19).
2.
Remove oil pressure/temperature sensor (19) and O-ring seal (18) from engine (1). Discard O-ring seal.
18
19
1
20
2
OIL PRESSURE/TEMPERATURE SENSOR INSTALLATION
1.
Install new O-ring seal (18) on oil pressure/temperature sensor (19).
2.
Install oil pressure/temperature sensor (19) on engine (1). Tighten sensor to 120 lb-in. (14 Nm).
NOTE
Ensure locking tab on connector snaps in place.
3.
Connect connector (20) of engine wiring harness (2) to sensor (19).
4.
Install engine cover (WP 0148 00).
END OF WORK PACKAGE
0094 00-6
