TM 10-3930-675-24-2
BRAKE INCHING SWITCH REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Materials/Parts
Maintenance Level
Organizational
Strap, Tiedown (Item 37, WP 0290 00)
Tools and Special Tools
Equipment Condition
Tool Kit, General Mechanic's (Item 128, WP 0289
Master battery switch in OFF position
REMOVAL
NOTE
Remove and discard tiedown straps as necessary.
1.
Disconnect brake inching switch connector (1) from wiring harness connector (2).
NOTE
Pivot pin is under slight spring tension.
2.
Press inward on two pivot pins (5) and remove cover (4) from brake inching switch (3).
3
2
4
1
5
350-622
