TM 10-3930-675-24-2
TOPHANDLER ANGLE SENSOR REPLACEMENT - CONTINUED
0101 00
INSTALLATION
1.
Position tophandler angle sensor (4) with cable (15) on vehicle.
2.
Using a jeweler's screwdriver, connect three wires of cable (15) to terminal block (19) in tophandler junction box (12).
3.
Install plastic covers (20) over excess cable (15) of tophandler angle sensor (4).
19
15
12
20
20
15
4.
Install cover (11) on tophandler junction box (12) and tighten six screws (10).
5.
Install grommet (13) and tighten cable nut (14).
6.
Install cable (15) on boom extension with three cable clamps (18), washers (17), and screws (16).
13
14
11
12
10
15
16,17,18
0101 00-4
