TM 10-3930-675-24-2
HYDRAULIC RESERVOIR AND LIFT CYLINDER SENSORS REPLACEMENT - CONTINUED
0102 00
TEMPERATURE SENSOR REPLACEMENT
1.
Drain hydraulic reservoir (WP 0186 00).
2.
Disconnect connector (2) of temperature sensor (4) from wiring harness (1).
3.
Remove temperature sensor (4) and copper washer (5) from hydraulic reservoir (3).
1
2
3
4,5
4.
Install copper washer (5) and hydraulic temperature sensor (4) on hydraulic reservoir (3).
5.
Connect connector (2) of temperature sensor (4) to wiring harness (1).
6.
Fill hydraulic reservoir (WP 0186 00).
0102 00-2
