TM 10-3930-675-24-2
BOOM ASSEMBLY WEAR PLATES REPLACEMENT - CONTINUED
0146 00
STYLE A WEAR PLATE INSTALLATION - CONTINUED
2.
Install cover (3) with six screws (1) and new lockwashers (2).
EXTENDING BOOM
3
FIXED
BOOM
1
4
NOTE
Spacing between extending boom and fixed boom should be as even as possible. Add or remove spac-
ers as necessary to maintain even spacing.
3.
Check spacing between wear plate and contact surface. Spacing must be 0.078 in. (2 mm). If not within specifications,
remove cover and add or subtract spacers to adjust wear plate spacing.
4.
5.
Perform operational check of boom assembly (TM 10-3930-675-10).
6.
Install boom access cover (WP 0100 00).
0146 00-5
