TM 10-3930-675-24-2
BOOM ASSEMBLY WEAR PLATES REPLACEMENT - CONTINUED
0146 00
STYLE B WEAR PLATE INSTALLATION
1.
To install style B wear plates on fixed boom lower front location:
NOTE
Extend boom and support tophandler on cribbing to relieve weight on lower front wear plates.
a.
Install shims (12) and wear plate (11) and align holes in wear plate with holes in bottom of fixed boom.
Install and tighten three screws (9) and washers (10) in accordance with Torque Limits (WP 0286 00).
b.
EXTENDING BOOM
FIXED BOOM
11,12
9,10
c.
Install lock plate (6), two new lockwashers (7), and screws (8).
Tighten screws (8) in accordance with Torque Limits (WP 0286 00).
d.
e.
Perform operational check of boom assembly (TM 10-3930-675-10).
0146 00-9