TM 10-3930-675-24-2
BOOM ASSEMBLY WEAR PLATES REPLACEMENT - CONTINUED
0146 00
STYLE B WEAR PLATE REMOVAL
1.
Measure thickness of wear plate. Measurement should be not less than 9/16 in. (14 mm). If wear plate is not as specified,
replace wear plate.
2.
To remove style B wear plates from fixed boom lower front location:
NOTE
Extend boom and support tophandler on cribbing to relieve weight on lower front wear plates.
a.
Remove two screws (8), lockwashers (7), and lock plate (6). Discard lockwashers.
6
7
8
0146 00-6
