TM 10-3930-675-24-2
MUDGUARD REPLACEMENT
THIS WORK PACKAGE COVERS
Replacement
INITIAL SETUP
Materials/Parts
Maintenance Level
Organizational
Nut, lock (P/N 5957) (6)
Tools and Special Tools
Personnel Required
Tool Kit, General Mechanic's (Item 128, WP 0289
Two
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during
procedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep
clear of heavy parts supported only by lifting device. Failure to follow this warning may result in
death or injury to personnel.
REPLACEMENT
1.
Remove six locknuts (2), 12 washers (3), six screws (4), and mudguard (1) from remote hydraulic control compartment
(5). Discard locknuts.
2.
Install mudguard (1) on remote hydraulic control compartment (5) with six screws (4), twelve washers (3), and six new
locknuts (2).
2,3,4
1
5
END OF WORK PACKAGE
