TM 10-3930-675-24-2
SPREADER 20 AND 40 FOOT ADJUSTMENT - CONTINUED
0169 00
MEASUREMENT AND ADJUSTMENT - 20 FT - CONTINUED
CAUTION
DO NOT remove washers on left side (spreader motor side) bolt stop. Removing washers from left-
side stop bolt will cause damage to spreader motor when operated.
NOTE
Remove or add one washer at a time, then recheck measurement.
7.
If measurement is not within limits, extend spreader section, add or remove washers (4) at 20-ft position bolt stop (1) on
right side only.
8.
Recheck chain tension and adjust if necessary (WP 0168 00).
4
1
434-40156
9.
Use override switch to operate twistlocks to unlocked position. Red light on boom will be lit (TM 10-3930-675-10).
MEASUREMENT AND ADJUSTMENT - 40 FT
1.
Check tophandler chain tension and adjust if necessary (WP 0168 00).
2.
Operate tophandler spreader to 40-ft position (TM 10-3930-675-10).
0169 00-3
