TM 10-3930-675-24-2
CAB LIFTING CYLINDER REPLACEMENT - CONTINUED
0173 00
INSTALLATION - CONTINUED
NOTE
Ensure new O-rings are lubricated with lubricating oil before installation.
4.
Remove cap/plug from two hydraulic hoses (9), install two new O-rings, and connect hoses to cylinder (4).
5.
Start engine (TM 10-3930-675-10).
6.
Remove wood cribbing from cab transport lift (3).
7.
Open hydraulic reservoir ball valve (WP 0181 00).
8.
Check for leaks and proper operation of cab lifting cylinder (TM 10-3930-675-10). Shut down engine.
9.
Check oil level in hydraulic reservoir (WP 0050 00).
NOTE
Replace hydraulic reservoir return filters after 100 hours of operation (WP 0185 00).
END OF WORK PACKAGE
0173 00-3/(0173 00-4 Blank)
