TM 10-3930-675-24-2
VALVE AND INJECTOR ADJUSTMENTS - CONTINUED
0207 00
VALVE ADJUSTMENT - CONTINUED
9.
Hold adjusting screw and tighten locknut.
10.
With adapter, tighten locknut to 35 lb-ft (47 Nm).
ADJUSTING
SCREW
LOCKNUT
ADAPTER
11.
Check adjustment by attempting to insert a 0.001 in. (0.03 mm) feeler gage between crosshead and rocker lever pad.
Valve lash is not correct if gage can be inserted.
12.
Perform injector and valve adjustments for remaining cylinders.
13.
Install rocker arm cover (WP 0052 00).
END OF WORK PACKAGE
0207 00-10
