TM 10-3930-675-24-2
VALVE AND INJECTOR ADJUSTMENTS - CONTINUED
0207 00
VALVE ADJUSTMENT - CONTINUED
3.
Insert thickness gage between top of crosshead and rocker lever pad.
NOTE
Two methods of adjusting valve lash can be used: The first method, which is preferred, is described in
steps 4 thru 7, and uses the inch-pound torque wrench; the second method is described in steps 8 thru
11.
4.
With inch-pound torque wrench, tighten adjusting screw to 6 lb-in. (0.7 Nm).
ROCKER
LEVER
TORQUE
THICKNESS
WRENCH
GAGE
5.
Hold adjusting screw in position and tighten locknut.
6.
With adapter, tighten locknut to 35 lb-ft (47 Nm).
ADJUSTING
SCREW
LOCKNUT
ADAPTER
0207 00-8
