TM 10-3930-675-24-2
TRANSMISSION TORQUE CONVERTER REPLACEMENT - CONTINUED
0223 00
INSTALLATION
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during
procedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep
clear of heavy parts supported only by lifting device. Failure to follow this warning may result in
death or injury to personnel.
1.
Position torque converter (4) on input shaft and slide into transmission bell housing (5).
NOTE
Ensure damper plates are not bent or damaged.
2.
Install three damper plates (3), 16 washers (2), and screws (1).
3.
Rotate damper plates (3) and torque converter (4) by hand to ensure no binding occurs.
4.
END OF WORK PACKAGE
0223 00-3/(0223 00-4 Blank)