TM 10-3930-675-24-2
TRANSMISSION ASSEMBLY REPLACEMENT - CONTINUED
0224 00
REMOVAL - CONTINUED
20.
Remove fittings for oil filter, oil sampling valve, oil cooler, and breather hoses.
21.
Remove emergency steering pump (WP 0235 00).
INSTALLATION
NOTE
If a replacement transmission is not being installed, proceed to step 5.
1.
Install emergency steering pump (WP 0235 00).
2.
Apply sealant to threads and install fittings for oil filter, oil sampling valve, oil cooler, and breather hoses.
3.
Apply sealant to threads and install these sensors (WP 0096 00):
a.
Gearbox temperature sensor
b.
Output speed sensor
c.
Engine speed sensor
d.
2WD/4WD sensor
e.
Turbine speed sensor
f.
Internal gear speed sensor
0224 00-10
