TM 10-3930-675-24-2
TRANSMISSION ASSEMBLY REPLACEMENT - CONTINUED
0224 00
INSTALLATION - CONTINUED
FRONT
16
17
14,15
14,15
RIGHT SIDE
LEFT SIDE
NOTE
Flywheel and damper plates are secured with 12 screws. Final tightening is done after all screws are
installed.
12.
Remove guide stud and install screw (11). Tighten screw hand tight.
13.
Bar engine over until next screw hole is visible and install screw (11). Tighten screw hand tight.
14.
Repeat step 13 for remaining screws until 12 screws are installed securing flywheel to damper plate.
15.
Bar engine over clockwise and tighten each screw (11) to 48 lb-ft (65 Nm).
11
0224 00-13
