TM 10-3930-675-24-2
SPREADER MAINTENANCE - CONTINUED
0245 00
NOTE
Place an index mark on hydraulic motor and spreader assembly to mark location for assembly.
HYDRAULIC MOTOR REMOVAL
1.
Remove two socket-head capscrews (2) and washers (3). Lift hydraulic motor (1) from spreader assembly (4).
2.
Remove and discard O-ring (5).
3.
Use two pry-bars to remove drive gear (6) from shaft of hydraulic motor (1).
1
2,3
6
5
434-40172
1
434-40089
4
HYDRAULIC MOTOR INSTALLATION
1.
Align keyway in drive gear (6) with key in shaft of hydraulic motor (1) and drive key into place with a dead blow ham-
mer.
2.
Install new O-ring (5).
3.
Position hydraulic motor (1) on spreader assembly (4) and secure in place with two socket-head capscrews (2) and
washers (3).
0245 00-2
