TM 10-3930-675-24-2
BOOM AND BRAKE SYSTEM HYDRAULIC PUMP REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Materials/Parts - Continued
Maintenance Level
O-ring (P/N 3505)
Direct Support
O-ring (P/N 921039.0015)
Tools and Special Tools
Personnel Required
Tool Kit, General Mechanic's (Item 128, WP 0289
Two
References
Materials/Parts
Equipment Condition
Oil, Lubricating, OE/HDO 10 (Item 26, WP 0290
Cab in transport position (TM 10-3930-675-10)
Brake hydraulic system pressure relieved (WP 0164
Transmission access covers and cab support
Master battery switch in OFF position
O-ring (P/N 3503)
Wheels chocked
WARNING
DO NOT disconnect or remove any hydraulic system line or fitting unless hydraulic system pres-
sure has been relieved. Tighten all connections before applying pressure. Escaping hydraulic fluid
under pressure can penetrate the skin, causing serious injury.
Search for leaks with a piece of cardboard. Protect hands and body from high-pressure fluids. If
an accident occurs, see a doctor immediately. Any fluid injected into the skin must be surgically
removed within a few hours or gangrene may result.
At operating temperature, hydraulic oil is hot. Allow hydraulic oil to cool before disconnecting
any hydraulic lines. Failure to do so could result in injury.
Hydraulic fluid is very slippery. Immediately wipe up any spills. Failure to follow this warning
may result in injury to personnel.