TM 10-3930-675-24-2
MAIN CONTROL VALVE REPLACEMENT - CONTINUED
0249 00
NOTE
Main control valve is located on right side of vehicle, on inner surface of frame.
Tag all hydraulic lines.
Remove nylon straps and clamp. Remove and discard tiedown straps as necessary to gain free
movement in hydraulic hoses.
REMOVAL
1.
Disconnect two hoses (1) from fittings (2) at top of control valve (5).
2.
On rearward-facing surface of control valve (5), remove four screws (3) and flange (4) and disconnect hose from control
valve. Remove and discard O-ring.
2
1
3
FORWARD
4
1
5
3.
Disconnect two hoses (10) from fittings (11) on underside of control valve (5).
4.
On forward-facing surface of control valve (5), disconnect hose (13) from fitting (12).
5.
On left inner surface of control valve (5), disconnect each of six remaining hoses (6) as follows: Remove four screws
(7), flange (8), and O-ring (9). Discard O-ring.
0249 00-2
