TM 10-3930-675-24-2
MAIN CONTROL VALVE REPLACEMENT - CONTINUED
0249 00
INSTALLATION - CONTINUED
6.
On rearward-facing surface of control valve (5), install new O-ring and hose with flange (4) and four screws (3).
7.
Connect two hoses (1) to fittings (2) at top of control valve (5).
2
1
3
FORWARD
4
1
5
8.
9.
Start engine (TM 10-3930-675-10). Raise and lower boom and check for leaks.
10.
11.
Install nylon straps, clamp, and new tiedown straps as necessary to support hydraulic hoses.
12.
Install transmission access covers and cab support frame (WP 0142 00).
13.
Return cab to operational position (TM 10-3930-675-10).
NOTE
Replace hydraulic reservoir return filters after 100 hours of operation (WP 0185 00).
END OF WORK PACKAGE
0249 00-6