TM 5-3810-306-34
INSTALLATION:
1. INSTALL CYLINDER LINERS (1) AND SEALS (2).
a. Lubricate surfaces A and B with clean engine oil.
b. Install new seals (2) on liners (1) as illustrated.
Lubricate with clean engine oil.
c.
Position marked liner (1) in proper cylinder bore.
Using liner driver, drive liner in until it is fully
seated.
NOTE
Liner clamps may also be used to
install liner. Install liner clamping
plate over liner, secure
with
capscrews and spacers.
capscrews to 50 ft-lbs (68 Nm).
Repeat for each liner.
2. INSPECT LINER PROTRUSION.
Limits:
.0005 - .0043 in.
(.013 - .109 mm)
4-22
