TM 5-3810-306-34
Section VII. ENGINE LUBRICATION SYSTEM MAINTENANCE
OIL PAN AND SUCTION TUBE INSTALLATION
TOOLS: General mechanic's tool kit: automotive (5180-00-177-7033)
SUPPLIES: Clean rags (Item 2, Appendix B)
Copper coat (Item 32, Appendix B)
No. 2 Permatex (Item 31, Appendix B)
Washer, flat sealing (Item 29, Appendix B)
Washer, flat sealing (Item 30, Appendix B)
Gasket (Item 226, Appendix B)
Gasket (Item 227, Appendix B)
EQUIPMENT CONDITIONS: Negative battery cable disconnected at shunt.
(Refer to TM 5-3810-306-20.)
Outriggers set and boom positioned over-the-side.
(Refer to TM 5-3810-306-10.)
Lube oil drained from engine. (Refer to LO 5-3810-306-12.)
Engine removed. (Refer to page 4-2.)
REMOVAL:
1. REMOVE OIL PAN (5).
a. Support oil pan (5) and remove bolts (7)
and washers (8).
b. Remove oil pan (5) and gasket (6).
Discard gasket (6).
2. REMOVE PLUGS (1) AND (4) AND SEALS (2)
AND (3). DISCARD SEALS (2) AND (3).
3. REMOVE SUCTION TUBE (11) AND GASKET
(12).
a. Remove two capscrews (9) and washers
(10) securing suction tube (11).
b. Remove nut (13), washer (14) and
capscrew (15) securing suction tube (11)
to brace (16).
c. Remove suction tube (11) and gasket
(12). Discard gasket (12).
4-57
