TM 5-3810-306-34
and press switch flush in shift housing.
j.
Secure jumper strap (2) with nuts (1). Torque #3
terminal nut to 33-37 ft. lbs. (44-49 Nm) and
h. Apply 1-2 drops of Loctite #2114 to threads of
field coil nut to 18-22 ft. lbs (24-29 Nm).
two hex head screws (3) and secure solenoid
switch (4) to field ring (49).
k.
Install ground wire to switch (4) terminal #4 and
to ground stud on housing (9). Torque terminal
#4 connection to 43-47 in lbs (5-6 Nm).
NOTE
NOTE
Use an open wrench to support the
bottom nut while tightening the top
Ground stud connection is made
nut.
finger-tight only.
i.
Apply two drops of Loctite #2114 to the last 1/4"
l.
Install rubber plug in plastic end base access
of switch (4), #3 terminal and field coil stud on
hole.
field ring (49).
END OF TASK
6-24
