TM 5-3810-306-34
2.
USING
A
TRANSMISSION
JACK
OR
NOTE
SUITABLE
DEVICE
CAPABLE
OF
It may be necessary to remove upper
SUPPORTING TRANSMISSION WEIGHT (780
left elbow to lower transmission.
POUNDS
-
354
KG),
POSITION
TRANSMISSION (1) UNDER FRAME AND
7.
USING SUPPORTING DEVICE, LOWER AND
RAISE IT INTO POSITION.
REMOVE TRANSMISSION.
3.
INSTALL FRONT AND REAR TRANSMISSION
MOUNTS
INSTALLATION:
a. Secure front and rear mounts (16 and 17) to
1.
IF A NEW TRANSMISSION IS TO BE
transmission using eight bolts (19) and washers
INSTALLED, REMOVE ALL FITTINGS FROM
(20). Torque bolts to 250 ft-lbs (333 Nm).
OLD ONE AND INSTALL THEM IN SAME
LOCATIONS ON NEW TRANSMISSION.
b. Place four upper bonded mounting centers (18)
in place between mounts and frame brackets
NOTE
and install four bolts (15).
Apply clean hydraulic oil to new O-
c. Lower supporting device until transmission is
rings and coat threads of fittings with
supported. Remove supporting device.
Loctite #545.
7-21
