TM 5-3810-306-34
d. Remove plug (341).
NOTE
e. Remove fitting (34m) and preformed packing
If forward and second clutch comes
(34p) with switch (34q) and elbow (34r). Discard
out with the transmission cover,
packing (34p).
spread ears on front bearing special
ring (34) and separate clutch and
f. Remove adapter plate (34c) from cover (5).
cover.
g. If necessary, remove switch (34q), elbow (34r)
f. Remove sleeve (34a)
and packing (34b).
and packing (34n) from fitting (34m). Discard
Discard packing (34b).
packing (34n).
3.
REMOVE GEARSHAFT (20).
6.
REMOVE TUBES (7) AND (11).
a. Tap on threaded end of gearshaft (20) with soft
a. Remove two bolts (10), lockwashers (9) and
mallet.
clips (8). Discard lockwashers (9).
b. Remove gearshaft (20).
CAUTION
4.
REMOVE BEARING (3).
Sleeves (15) must be removed while
removing tubes (7) and (11) to
a. Remove and discard seal (1).
prevent tubes from bending.
b. Remove retaining rings (2) and bearing (3).
b. Remove tubes (7) and (11), sleeves (15) and
preformed packings (6). Discard preformed
packings (6).
5.
REMOVE ADAPTER PLATE (34c).
a. Remove fitting (34d) and preformed packing
7. REMOVE BUSHINGS (14).
(34e). Discard packing (34e).
a. Remove two bolts (12), lockwashers (9) and
b. Remove fittings (34f) and preformed packings
sleeves (13). Discard lockwashers (9).
(34g) and (34h). Discard packings (34g) and
(34h).
b. Press bushings (14) out of transmission cover
(5).
c. Remove fitting (34i) and preformed packings
(34j) and (34k). Discard packings (34j) and
(34k).
7-26
