TM 5-3810-306-34
14.
REMOVE TRANSMISSION COVER (58).
d. Remove transmission cover (58) and gasket
(59). Discard gasket (59).
a. Remove
thirteen
capscrews
(53)
and
e. Inspect studs (57) for damage.
If damaged,
remove stud(s).
Discard lockwashers (56).
f. Remove packing (63c)
and
sleeve
(63d).
Discard packing (63c).
c. Using pry slots provided, pry transmission cover
(58) while tapping low clutch/idler shaft (71).
15.
REMOVE BEARING (63).
a. Remove piston rings (62).
NOTE
b. Using bearing puller, remove bearing kb3).
Do not lose rear bearing lock ball
(63b).
7-29