TM 5-3810-306-34
Section I. AIR COMPRESSOR MAINTENANCE
AIR COMPRESSOR INSTALLATION
TOOLS:
General mechanic's tool kit: automotive (5180-00-177-7033)
Shop Equipment Contact Maintenance Truck Mtd (4930-00-294-9518)
Shop Equipment General Purpose Repair, Semi-trailer Mtd (4930-01-006-3229)
Shop Equipment Machine Shop; FM Basic (3470-00-754-0708)
Shop Equipment Auto-Maintenance and Repair Common No. 1 (4910-00-754-0650)
Shop Equipment Auto-Maintenance and Repair; Org Suppl No. 1 (4910-00-754-0653)
SUPPLIES:
Gasket (Item 98, Appendix B)
Gasket (Item 99, Appendix B)
EQUIPMENT CONDITIONS:
Negative battery cable disconnected at shunt. (Refer to TM 5-3810-306-20.)
Radiator drained. (Refer to TM 5-3810-306-20.)
REMOVAL:
1. REMOVE TUBES AND LINES.
c. Remove compressor (2).
a. Loosen
clamps
(6)
and
remove
d. Remove gasket (14) and discard.
compressor inlet tube (7), molded hose (8)
and compressor inlet hose (9). Replace
e. Remove capscrews (21) and brace (11).
as required.
3.
INSPECT PARTS FOR DAMAGE. REPLACE AS
b. Tag and remove water inlet (4) and water
REQUIRED.
outlet (5) tubes and fittings (19) and (20)
from compressor (2).
Replace as
INSTALLATION:
required.
1. INSTALL AIR COMPRESSOR (2).
c. Remove air lines (3).
a. Position new gasket (14) on front gear
d. Remove lube oil supply tube (1) from
cover.
compressor (2).
b. Mount air compressor (2) on studs (9) and
e. Remove capscrews (16), inlet connector
retain with washers (8) and lock nuts (7).
(17) and gasket (18). Discard gasket (18).
2. INSTALL TUBES AND LINES.
2. REMOVE AIR COMPRESSOR (2).
a. Install fittings (19) and (20), water inlet (4)
a. Remove
capscrews
(10)
securing
and water outlet (5) tubes.
compressor mounting
brace
(11) to
engine.
b. Install inlet connector (17) and new gasket
(18). Secure with capscrews (16).
b. Remove nuts (12) and washers (13) from
mounting studs (15).
9-2
