TM 5-3810-306-34
2. INSTALL HYDRAULIC LINES TO HOIST (1).
d. Install hydraulic tube (2) and new preformed
packing (6). Secure with four capscrews (4) and
a. Connect fitting (9) and new preformed packing
lockwashers (5).
(10) to motor drain tube and tighten.
3. CONNECT NEGATIVE BATTERY CABLE
AT
b. Connect fitting (7) and new preformed packing
SHUNT. (REFER TO TM 5-3810-306-20.)
(8) to case drain tube and tighten.
4. INSTALL WIRE ROPE TO HOIST DRUM. (REFER
c.
Install hydraulic tube (3) and new preformed
TO TM 5-3810-306-20.)
packing (6) to motor control valve. Secure
clamp with four capscrews (4) and lockwashers
5. TEST FOR PROPER OPERATION.
(5).
END OF TASK
15-35
