TM 5-3810-306-34
INSTALLATION:
1. LUBRICATE BEARING.
(REFER TO LO 5-3810-
306-12.)
2. INSTALL POSITIVE SWING LOCK.
a. Install bearings (1) and (2) in mounting bracket.
b. Align swing lock block (11) with mounting
bracket holes and insert turntable lock shaft (3).
nuts (4) to secure turntable lock shaft (3).
c. Secure control cable clevis (9) to swing lock
block (11) with clevis pin (8), washer (7) and new
cotter pin (6).
d. Install spring (10) on swing lock block (11) and
mounting bracket.
3. CHECK POSITIVE SWING LOCK OPERATION.
(REFER TO TM 5-3810-306-10.)
5. CONNECT NEGATIVE BATTERY CABLE AT
SHUNT. (REFER TO TM 5-3810-306-20.)
END OF TASK
15-132