TM 55-8115-202-14
NOTES:
1.
USE REMOVED LINING SHEET FOR HOLE LAYOUT AND SIZE PATTERN (USE BULK MATERIAL
FOR NEW SHEET)
2.
INSULATION AND LINING SHEET ARE CEMENTED WITH CONTACT ADHESIVE
REMOVAL:
STEP 1. REMOVE DOOR (PARA 4-20).
STEP 2. REMOVE SPACER STRIPS
STEP 3. RIGHT DOOR ONLY:
REMOVE ESCAPE DOOR AND
DOCUMENT HOLDER (PARA 4-35).
STEP 4. DRILL OUT RIVETS AROUND
ALL EDGES OF LINING SHEET.
STEP 5. PEEL LINING SHEET OFF DOOR,
BEING CAREFUL NOT TO DAMAGE
FOAM INSULATION.
STEP 6. REPLACE DAMAGED FOAM
INSULATION (PARA 4-21, c).
INSTALLATION:
STEP 1. APPLY ARMSTRONG 520 CONTACT
ADHESIVE TO SURFACE OF FOAM
INSULATION AND LINING SHEET.
STEP 2. PLACE NEW LINING SHEET (SEE
NOTES) OVER FOAM INSULATION,
BEING CAREFUL TO LINE UP
RIVET HOLES.
STEP 3. TUCK IN DOOR SEAL EDGES AND
INSTALL POP RIVETS THROUGH
LINING SHEET TO DOOR BOX
CHANNELS.
STEP 4. INSTALL SPACER STRIPS
STEP 5. RIGHT DOOR ONLY: INSTALL
ESCAPE DOOR AND DOCUMENT
HOLDER (PARA 4-36).
STEP 6. INSTALL DOOR (PARA 4-22).
