TM 55-8145-201-14
4-26. ELECTRIC POWER CABLE REPAIR.
This task consists of:
a. Removal
b. Disassembly
c.
Cleaning
d. Inspection
e. Repair f.
Assembly
g. Installation
INITIAL SET-UP:
Tools:
References:
General Mechanics Tool Kit (Item 4, App B)
TM 9-4110-252-14
Electrical Repair Kit (Item 2, App B)
TM 5-6115-585-12/34
Materials/Parts:
Equipment Condition:
Refrigeration unit shutdown (TM 9-4110-252-14)
a. Removal.
(1) Disconnect power cable from refrigeration unit (TM 9-4110-252-14).
(2) Remove power cable from generator set (TM 5-6115-585-12/34).
b. Disassembly.
(1) Loosen setscrew (6) on nut (9).
(2) Unscrew nut (9) from housing (1).
(4) Pull terminal block (2), wiring (7) and attached parts from housing (1).
(5) Loosen four screws (3) and disconnect wiring (7) from terminal block (2).
(6) Pull sleeve (4), bushing (5),washer (10), and nut (9) from cable (8).
c.
Cleaning. Wipe dirt, grease, oil, and contaminants from cable using wiping rag.
d. Inspection.
(1) Inspect cable (8) insulation for cuts, tears, cracks, and deep scratches.
(2) Inspect wiring (7) for cuts and signs of over heating.
(3) Inspect housing (1), nut (9) and sleeve (4) for cracks.
(4) Inspect terminal block (2) for cracks, corrosion and missing terminal screws (3).
4-40