TM 55-8145-201-14
4-27. LIGHT ASSEMBLY (EXTERIOR) REPAIR.
This task consists of:
a. Removal
b. Disassembly
c.
Cleaning
d. Inspection
e. Repair f.
Assembly
g. Installation
INITIAL SET-UP:
Tools:
References:
General Mechanics Tool Kit (Item 4, App 13)
TM 9-4110-252-14
Material/Parts:
TM 5-6115-585-12/34
Solstice sealant (Item 10, App D)
Equipment Condition :
Refrigeration unit shutdown (TM 9-4110-252-14)
a. Removal.
(1) Disconnect power cable (9) from generator set (TM 5-6115-585-12/34).
(2) Remove nut (8), lockwashers (7), screw (11), and clamp (6) from bracket (10).
(3) Remove two screws (15), cover (1) and gasket (14) from box (4).
(4) Tag wiring (12) and remove three wire nuts (2).
(5) Pull power cable (9) out of box (4) and through bushing (13).
b. Disassembly.
CAUTION
To prevent damage to the equipment, do not attempt to remove adapter from
container wall unless defective. Adapter is glued in place.
(1) Remove two screws (3) from box (4).
(1) Unscrew box (4) from adapter (5) on container wall (16).
(2) Remove bushing (13) from box (4).
c.
Cleaning. Clean components with wiping rag. Remove all grease, dirt, and contaminants.
d. Inspection.
(1) Inspect cable (9) for cuts, tears and deterioration of insulation.
(2) Inspect plug on cable (9) for bent, burnt or broken spades.
(3) Inspect bushing (13) and adapter (5) for cracks.
e. Repair. Replace defective components.
4-42