TM 55-8145-201-14
4-28. LIGHT ASSEMBLY (INTERIOR) REPAIR
This task consists of:
a. Removal
b. Disassembly
c.
Cleaning
d. Inspection
e. Repair f.
Assembly
g. Installation
INITIA: SET-UP:
Tools L
References:
General Mechanics Tool Kit (Item 4, App 13)
TM 9-4110-252-14
Material/Parts:
TM 5-6115-585-12/34
Equipment Condition :
Refrigeration unit shutdown (TM 9-
4110-252-14)
6115-585-12/34)
Light assembly (exterior) removed
a. Removal.
(1) Loosen screw (25) and remove guard (26) from fixture (21).
(2) Remove globe (24) and bulb (23) from fixture (21).
b. Disassembly.
NOTE
Disassemble components only to the level required to perform repair.
(1) Remove two screws (22) and fixture (21) from lamp holder (11).
(2) Tag and disconnect wiring (15) from fixture (21).
(3) Remove two outer screws (20), switch (19) and gasket (18) from box (16).
(4) Tag and disconnect wiring (15) from switch (19).
(5) Remove seven screws (27) and clamps (28). Lower assembled components from
container wall (29).
(6) Remove wiring (15) from box (16), nipple (13), box (11) and conduit (5 and 7).
(7) Loosen locknut (14) and remove box (16) from nipple (13).
(8) Loosen locknut (12) and remove nipple (13) from lamp holder (11).
(9) Loosen locknut (9) and remove lamp holder (11) from connector (8).
(10)
Remove lock nut (9) and connector (8) from conduit (7).
(11)
Loosen connector (6) and disconnect conduit (7) from conduit (5).
(12)
Remove connector (4) from adapter (3).
4-46