TM 55-8145-201-14
4-29. ESCAPE DOOR REPAIR
This task consists of:
a. Removal
b. Disassembly
c. Cleaning
d. Inspection
e. Repair
f. Assembly
g. Installation
INITIAL SET-UP:
Tools:
References:
General Mechanics Tool Kit (Item 4, App 13)
TM 9-4110-252-14
Material/Parts:
TM 5-6115-585-12/34
Adhesive (Item 1, App D)
Equipment Condition :
Wiping rag (Item 6, App D)
Refrigeration unit shutdown (TM 9-4110-252-14)
Detergent (Item 2, App D)
Generator set shutdown (TM 5-6115-585-12/34)
Gasket (Item 15, App F)
Gasket (Item 16, App F)
a. Removal.
(1) Open right door (5).
(2) Remove six handles (1), flat washers (2), and interior frame (15) from right
door (5).
(3) Push escape panel (12) and exterior frame (8) from right door (5).
b. Disassembly.
(1) Remove four gasket strips (3, 4, 13, and 14) from interior frame (15).
(2) Remove four gasket strips (6, 7, 10, and 11) from exterior frame (11).
c.
Cleaning.
(1) Wash components with fresh water and detergent.
(2) Rinse components with clean water.
(3) Dry components with wiping rag.
d. Inspection.
(1) Inspect interior frame (15) for cracks and corrosion.
(2) Inspect exterior frame (8) for cracks, corrosion, and stripped threads on studs (9).
(3) Inspect handles (1) for cracks and stripped threads.
(4) Inspect escape panel (12) for cracks, tears, and punctures.
e. Repair. Replace defective components.
4-50
