TM 9-3950-253-13&P
0008
SECURE CONTAINER FOR TRANSPORT - Continued
Secure Transport Locks
NOTE
Perform steps 1 through 13 for both right and left sides.
1.
Remove clip (Figure 16, Item 12) from transport lock (Figure 16, Item 8).
2.
At stowage assembly, lift handwheel lock (Figure 16, Item 7) and loosen handwheel (Figure 16, Item 9) to
full extension.
3.
Rotate anvil (Figure 16, Item 13) and remove transport lock (Figure 16, Item 8) from stowage bracket
(Figure 16, Item 14).
4.
Push transport lock (Figure 16, Item 8) upward into container corner casting (Figure 16, Item 6). Verify that
anvil (Figure 16, Item 13) is inserted into container corner casting.
5.
Continue to support transport lock handwheel (Figure 16, Item 9) and turn it 90 clockwise.
6.
Lower transport lock handwheel (Figure 16, Item 9) and check that anvil shoulders are now resting on inner
surface of container corner casting (Figure 16, Item 6).
7.
Maintaining downward pressure on handwheel (Figure 16, Item 9), tighten handwheel until transport lock
(Figure 16, Item 8) is snug against container but loose enough to adjust position.
8.
Remove clip (Figure 16, Item 10), bolt (Figure 16, Item 2), and transport lock adjustable strut (Figure 16,
Item 3) from stowage bracket (Figure 16, Item 1).
9.
If necessary, remove clip pin (Figure 16, Item 11) from adjustment lever (Figure 16, Item 4), loosen
adjustment lever and adjust length of transport lock adjustable strut until clevis (Figure 16, Item 5) aligns
with transport lock (Figure 16, Item 8).
10.
Install clevis (Figure 16, Item 5), bolt (Figure 16, Item 2), and clip (Figure 16, Item 10) on transport lock
(Figure 16, Item 8).
11.
If loosened, tighten adjustment lever (Figure 16, Item 4) and install clip pin (Figure 16, Item 11).
12.
Lift handwheel lock (Figure 16, Item 7) and tighten handwheel (Figure 16, Item 9) until transport lock
(Figure 16, Item 8) is secure against container corner casting (Figure 16, Item 6).
13.
Ensuring it passes between two finger grips on handwheel (Figure 16, Item 9), lower handwheel lock
(Figure 16, Item 7).
0008-12
03/15/2011Rel(1.10)root(opusualwp)wpno(O582008)